- Ext. cal.
- 230 V
- Battery
- Tolerances
- Hold
- Units
Crane Scale KERN HFA
Compact crane scale with integrated display can also be used for tensile force measurement
Choose your reference
- Maximum capacity
- 600 kg
- Pan
- —
- Display readability (d)
- 0,2 kg
- Verification scale interval (e)
- —
- Metrology
- Non-regulated
- Lead time
- Ships within 48 h
Spare parts & accessories
Tick your accessories: they are added to the price and go to the cart with the scale.
Measurement
- Reference
- HFA 600K-1
- Maximum capacity
- 600 kg
- Verification scale interval (e)
- 0,2 kg
- Precision (d)
- 0,2 kg
- Brand
- Kern
Regulation
- Legal-for-trade approval possible
- No
- CE marking
- Yes
- Water / dust protection
- Not specified
Functions
- External calibration
- Yes
- 230 V mains power
- Yes
- Rechargeable battery
- Yes
- RS232 output
- Not specified
- Wi-Fi
- Not specified
- Built-in printer
- Not specified
- Stainless steel construction
- No
- Below-balance weighing hook
- No
- Parts counting
- Not specified
- Percentage weighing
- Not specified
- Check-weighing
- Yes
- Totalization
- Not specified
- Formulation
- Not specified
- Display hold
- Yes
- Unit switching
- Yes
- Dosing / filling
- Not specified
Display height : 23 mm. Backlight : yes.
Battery : 3×1.5 V AA. Operating time : 30 h. Mains adapter/adapter included : EURO;UK;US. Charging time : 12 h. Input Voltage : 100 V - 240 V, 50 / 60 Hz. Operating time (Backlight off) : 30 h.
Internal measurement frequency : 60 Hz. TUEV (TÜV) : yes.
Hanging scale (A) : 90 mm. Hanging scale (C) : 100 mm. Calibration method : Adjusting with external weight. Warm up time : 10 min. Weighing units : kg;lb;N. Maximum humidity : 80 %. Maximum operating temperature : 35 °C. Minimum ambient temperature : 5 °C.
With the TÜV certification mark, the scale meets the requirements of the standard EN 13155 (Non-fixed load lifting attachments/Breakage resistance) and EN 61010-1 (Electrical safety). With its high-quality finish, low weight and compact dimensions, this crane scale (tensile force gauge) is an essential device for industrial use, on building sites, in freight centres, ports etc. Because of its compact design it is also ideally suited for installation in systems where space is limited, etc. Ideally suited for determining weight quickly while loading and unloading. Peak load display (peak hold). Hold function: For easy reading of the weighing result, the display can be „frozen“ by pressing the Hold key. Tare: Resets the display to „0“ when there is a load on the scale. Now removed or added loads are directly displayed.
Standards and approvals for this instrument.
- CE









